Skip to content
A Division of Iron Crest Remodel(208) 775-8999
Boise Bath — bathroom remodeling in Boise and the Treasure Valley
Design concept
Acrylic Shower & Wall Panel Installation · Emmett, ID

Acrylic Shower & Wall Panel Installation in Emmett, Idaho

Free in-home consultation and a fixed written quote for acrylic shower & wall panel installation in Emmett and nearby.

Acrylic Shower & Wall Panel Installation for Emmett homes

Emmett's houses are the oldest of the cities on this site, with a median build year of 1977 in Census estimates, and the walls behind their surrounds often need work before rigid panels can go on. Some were never waterproofed, layers of earlier repair may sit over the original framing, and decades of settling can leave studs out of plumb. Panels need flat, sound walls, so the old surround comes off, the framing is straightened with shims or furring, and new backer goes up before a panel is cut. Homes built before 1978 fall under the EPA's lead-safe rule for work that disturbs painted surfaces, and plumbing changes are permitted and inspected through State of Idaho programs.

Request a free estimate

Acrylic Shower & Wall Panel Installation in Emmett, done right

Tell us about your space and we'll follow up to schedule a free, no-obligation design consultation with clear, fixed pricing.

Prefer to talk? Call (208) 775-8999

Recent work in the Treasure Valley

  • A finished Meridian master bathroom with a tiled walk-in shower, linear drain, navy double vanity and quartz counter

    Meridian

    Tub-shower replaced with a tiled walk-in shower; new double vanity

  • A finished bathroom in Star with a grey tiled tub surround, floating white vanity and backlit mirror

    Star

    Full bathroom remodel — tiled tub surround, floating vanity, lit mirror

  • A finished Caldwell walk-in shower with a full-width tiled bench, grab bars, a long niche and a handheld shower head

    Caldwell

    Tiled walk-in shower with a full-width bench and grab bars

Completed projects, built by Iron Crest Remodeling Group, Boise Bath's parent company. See the gallery

Request your free estimate

A few quick details. We reply within one business day.

Idaho-registered contractor · RCE-6681702 · Fully insured · We reply within one business day (Mon–Fri).

What's included

Acrylic Shower Installation and Replacement

  • Old surround, tile or fiberglass unit removed so the studs and subfloor can be checked for moisture, rot and plumb
  • Wet or damaged framing and backer replaced, and the leak behind it fixed, before any panel goes up
  • Acrylic or solid-surface base set level on full support, with the drain connection water-tested
  • Wall panels cut to the measured opening, valve and showerhead holes templated, and every seam and edge sealed
  • Trim, corner shelves, a seat and grab-bar blocking as chosen, covered by our written 1-year workmanship warranty
Design conceptDesign concept: A shower finished in large stone-look wall panels with a low white base and linear drain, beside a floating oak vanity

What affects cost in Emmett

Honest pricing, no guesswork

Wall and floor work set an Emmett price more than the panels do. Straightening walls, replacing wet framing or a worn subfloor, and renewing old supply lines or drain fittings at the shower are each priced once the surround is off. Lead-safe practices at demolition in pre-1978 homes are part of the plan from the start, not an addition later.

After a free in-home consultation we give you a clear, fixed quote in writing — no surprise change orders once the project is underway.

Emmett questions, answered

Frequently asked

Our Emmett bathroom walls lean. Can rigid panels still go up?
Yes, once the walls are made straight. Acrylic and solid-surface panels are stiff sheets, and on a wall that leans or bows they leave uneven gaps at the corners or bridge hollows that later crack or come loose. With the old surround off, the studs are shimmed, planed or furred out until the wall is flat and plumb, and new backer goes over them.
What if the floor under an old Emmett tub-shower turns out to be soft?
It is repaired before any base goes down. A shower base needs a flat, solid floor to bed on, and a soft subfloor lets it flex until it cracks. Rotten subfloor around the old drain is cut back to sound framing and replaced, a joist that has been wet is reinforced, and a corroded drain fitting is renewed. Then the new base is set level and water-tested.
An Idaho mountain lake ringed by evergreens

Ready to Transform Your Bathroom?

A fixed-price quote, a 1-year workmanship warranty, and a project manager who answers the phone. Let's build a space you'll love for years.

No obligation · Licensed & insured · Idaho registration RCE-6681702 · 1-year workmanship warranty

Call NowFree Estimate