Skip to content
A Division of Iron Crest Remodel(208) 775-8999
Boise Bath — bathroom remodeling in Boise and the Treasure Valley
Design concept
Acrylic Shower & Wall Panel Installation · Garden City, ID

Acrylic Shower & Wall Panel Installation in Garden City, Idaho

Free in-home consultation and a fixed written quote for acrylic shower & wall panel installation in Garden City and nearby.

Acrylic Shower & Wall Panel Installation for Garden City homes

About a quarter of Garden City's homes were built before 1980, by Census estimates, and the older, modest houses among them often still have their original surround. Replacing it with panels starts by taking it off and checking the framing and subfloor it covered. Manufactured homes, a real part of the city's housing, need a different check: their wall construction and subfloors vary more than a site-built house's, so the wall is opened before choosing between glue-up panels on a solid backer and a flanged system fastened to the framing. The newer riverfront townhomes are the simplest case, with recent framing behind the shower.

Request a free estimate

Acrylic Shower & Wall Panel Installation in Garden City, done right

Tell us about your space and we'll follow up to schedule a free, no-obligation design consultation with clear, fixed pricing.

Prefer to talk? Call (208) 775-8999

Recent work in the Treasure Valley

  • A finished Meridian master bathroom with a tiled walk-in shower, linear drain, navy double vanity and quartz counter

    Meridian

    Tub-shower replaced with a tiled walk-in shower; new double vanity

  • A finished bathroom in Star with a grey tiled tub surround, floating white vanity and backlit mirror

    Star

    Full bathroom remodel — tiled tub surround, floating vanity, lit mirror

  • A finished Caldwell walk-in shower with a full-width tiled bench, grab bars, a long niche and a handheld shower head

    Caldwell

    Tiled walk-in shower with a full-width bench and grab bars

Completed projects, built by Iron Crest Remodeling Group, Boise Bath's parent company. See the gallery

Request your free estimate

A few quick details. We reply within one business day.

Idaho-registered contractor · RCE-6681702 · Fully insured · We reply within one business day (Mon–Fri).

What's included

Acrylic Shower Installation and Replacement

  • Old surround, tile or fiberglass unit removed so the studs and subfloor can be checked for moisture, rot and plumb
  • Wet or damaged framing and backer replaced, and the leak behind it fixed, before any panel goes up
  • Acrylic or solid-surface base set level on full support, with the drain connection water-tested
  • Wall panels cut to the measured opening, valve and showerhead holes templated, and every seam and edge sealed
  • Trim, corner shelves, a seat and grab-bar blocking as chosen, covered by our written 1-year workmanship warranty
Design conceptDesign concept: A shower finished in large stone-look wall panels with a low white base and linear drain, beside a floating oak vanity

What affects cost in Garden City

Honest pricing, no guesswork

What sits behind the shower decides a Garden City price more than the panel choice does. An older house may need framing or subfloor repair once the original surround is off, and a manufactured home may need new backer before glue-up panels can go on. A new townhome usually needs neither, so its figure follows the system and accessories chosen.

After a free in-home consultation we give you a clear, fixed quote in writing — no surprise change orders once the project is underway.

Garden City questions, answered

Frequently asked

Can acrylic panels be glued to the walls of a Garden City manufactured home?
Only after the wall has been opened and checked. Wall construction in manufactured homes varies more than in site-built houses, and glue-up panels need a flat, solid backer of the kind their maker specifies. Where the wall cannot provide that, new backer goes up first, or a flanged multi-piece system that fastens to the framing is used instead.
Is solid surface too heavy for a Garden City manufactured home?
Not necessarily, but it is a question to settle before ordering. Solid-surface and composite panels weigh considerably more than acrylic, and in a manufactured home the walls and floor that carry them differ from one home to the next. With the old surround off, the framing and the subfloor under the base are assessed, and where they are doubtful, a lighter acrylic system is the safer choice.
An Idaho mountain lake ringed by evergreens

Ready to Transform Your Bathroom?

A fixed-price quote, a 1-year workmanship warranty, and a project manager who answers the phone. Let's build a space you'll love for years.

No obligation · Licensed & insured · Idaho registration RCE-6681702 · 1-year workmanship warranty

Call NowFree Estimate