Skip to content
A Division of Iron Crest Remodel(208) 775-8999
Boise Bath — bathroom remodeling in Boise and the Treasure Valley
Design concept
Shower Remodeling · Mountain Home, ID

Shower Remodeling in Mountain Home, Idaho

Free in-home consultation and a fixed written quote for shower remodeling in Mountain Home and nearby.

Shower Remodeling for Mountain Home homes

About a quarter of Mountain Home's homes were built between 2000 and 2009, more than in any other decade, and a shower from those years is usually a molded fiberglass or acrylic unit fastened straight to the studs. After two decades the typical complaints are a floor that flexes or has cracked, caulk joints that no longer hold, a dull surface and a valve that drifts hot and cold. A shower remodel deals with all of it in the footprint the shower already has. The unit is cut out, the framing and drain are inspected, a new pressure-balancing valve goes in the open wall, and a sloped, waterproofed pan and walls are built and water-tested before tile or panels.

Request a free estimate

Shower Remodeling in Mountain Home, done right

Tell us about your space and we'll follow up to schedule a free, no-obligation design consultation with clear, fixed pricing.

Prefer to talk? Call (208) 775-8999

Recent work in Mountain Home

  • A finished Mountain Home walk-in shower with white walls, sage green tile trim, a pebble mosaic floor and two shower heads

    Mountain Home

    Shower pan rebuilt; new walls, pebble tile floor and tiled half wall

  • A finished Meridian master bathroom with a tiled walk-in shower, linear drain, navy double vanity and quartz counter

    Meridian

    Tub-shower replaced with a tiled walk-in shower; new double vanity

  • A finished bathroom in Star with a grey tiled tub surround, floating white vanity and backlit mirror

    Star

    Full bathroom remodel — tiled tub surround, floating vanity, lit mirror

Completed projects, built by Iron Crest Remodeling Group, Boise Bath's parent company. See the gallery

Request your free estimate

A few quick details. We reply within one business day.

Idaho-registered contractor · RCE-6681702 · Fully insured · We reply within one business day (Mon–Fri).

What's included

Shower Remodeling and Replacement

  • Old unit, panels or tile removed to the studs and hauled away
  • Framing, subfloor, drain and supply lines inspected while they are exposed
  • New pressure-balancing or thermostatic valve set in the open wall
  • Sloped pan and continuous waterproofing, water-tested before tile
  • Tile or wall panels, glass and trim, covered by our written 1-year workmanship warranty
Design conceptDesign concept: A rebuilt tile shower alcove with stone-look wall tile and a low curb, beside an oak vanity with a white top

What affects cost in Mountain Home

Honest pricing, no guesswork

With sound framing behind a 2000s unit, the price follows the choices: a site-built tile pan or a manufactured base, tile or solid panels, a niche, a bench and the glass. In the older share of the housing, where a tiled stall has leaked for years, replacing damaged studs or subfloor comes first and is priced once the wall is open.

Our published range

$12,000–$22,000

A shower rebuilt in tile is the same scope as a walk-in / custom tile shower, which we price at $12,000–$22,000.

Ranges from quotes issued by Iron Crest / Boise Bath, 2026-09. Your fixed price comes after a free in-home consultation.

What moves the price in the Treasure Valley →

After a free in-home consultation we give you a clear, fixed quote in writing — no surprise change orders once the project is underway.

Mountain Home questions, answered

Frequently asked

Can a one-piece fiberglass shower be removed from a finished Mountain Home bathroom?
Yes. One-piece units were set before the walls were finished and will not pass through the doorway whole, so the old one is cut into sections where it stands and carried out. Its replacement arrives as a separate pan and wall materials built in place. Drywall around the opening is patched as part of the job, and the rest of the room is protected.
Does the shower valve get replaced when a 2000s Mountain Home shower is rebuilt?
It should be, and we include it. The valve sits inside the wall, so the rebuild is the one time it can be reached without cutting tile. A new pressure-balancing or thermostatic valve holds temperature when a toilet is flushed elsewhere in the house, and its trim will match the new finish. Replacing it later would mean opening a finished wall.
An Idaho mountain lake ringed by evergreens

Ready to Transform Your Bathroom?

A fixed-price quote, a 1-year workmanship warranty, and a project manager who answers the phone. Let's build a space you'll love for years.

No obligation · Licensed & insured · Idaho registration RCE-6681702 · 1-year workmanship warranty

Call NowFree Estimate